www.petsafe.net
6
EN
FR
ES
NL
IT
DE
How the System Works
A radio signal travels from the Fence Transmitter through a buried wire, marking the boundaries you wish to set for your dog.
Your dog wears a Receiver Collar that detects the signal at the boundary. As your dog approaches the boundary, the Receiver
Collar issues a warning tone. If he proceeds further, he receives a safe but startling Static Stimulation. While harmless, the
stimulation will persuade him to stay in the containment area you’ve established. Boundary flags are a temporary visual aid for
your pet; remove them after training. This PetSafe
®
In-Ground Fence
™
System has been proven safe, comfortable, and effective
for pets over 3.6 kg.
Key Definitions
Fence Transmitter:
Transmits the radio signal through the Boundary Wire.
Pet Area
: Area within the Warning Zone where your pet can roam freely.
Warning Zone:
Outer edge of the Pet Area where your pet’s Receiver Collar begins to beep, warning him not to go into the
Static Stimulation Zone.
Static Stimulation Zone:
Zone beyond the Warning Zone where your pet’s Receiver Collar will emit a Static Stimulation,
signalling him to return to the Pet Area.
Boundary Width:
Combination of the Warning Zone and the Static Stimulation Zone.
Receiver Collar:
Receives the radio signal from the Boundary Wire.
Stimulation Level Button:
Adjusts the level of Static Stimulation your pet receives in the Static Stimulation Zone.
Receiver Indicator Light:
Indicates the level of stimulation at which the Receiver Collar is set. This light also serves as a low
battery indicator.
Contact Points:
Deliver the safe Static Stimulation when your pet moves into the Static Stimulation Zone.
Power Jack:
Where the Power Adaptor plugs into the Fence Transmitter.
Boundary Control Switch:
Switch located on the Fence Transmitter to adjust according to the length of Boundary Wire used.
Boundary Wire Terminals:
Where the Boundary Wires connect to the Fence Transmitter in order to complete a
continuous loop.
Loop Indicator Light:
Indicates that the Boundary Wire makes a complete loop, enabling the signal to be transmitted.
Boundary Width Control:
Adjusts the width of the Warning and Static Stimulation Zones.
Note: Adjusting the knob does not
change the level of Static Stimulation on the Receiver Collar.
Fence Transmitter
Receiver Collar
}
Boundary Width Control
Power Light
Loop Indicator Light
Boundary
Wire Terminals
Boundary
Control Switch
Power Jack
Stimulation Level Button
Receiver
Indicator Light
Battery
Washers
Contact Points
Pet Area
Boundary
Width
Static
Stimulation Zone
Static Stimulation Zone
Fence Transmitter
Warning Zone
Boundary Wire
Warning Zone
