4
Customer Care Center 1-800-732-2677
• Plug the Surge Protector into a grounded (3-prong) outlet
that is within 5 feet of the Fence Transmitter. ALWAYS use a
grounded (3-prong) outlet to ensure maximum protection.
• Do not remove the ground prong from the Surge Protector
plug. Do not use a 3-prong plug to 2-prong outlet converter.
Doing so will make the Surge Protector ineffective against
surges or spikes.
• Use care when mowing or trimming your grass not to cut the
loop wire.
• Verify that the boundary loop and transmitter wires connect to
the proper Surge Protector terminals. Reversed connections
will result in an increased risk of surge related damage.
• For added protection, when unused for long periods of time
or prior to thunderstorms, unplug from the wall outlet and
disconnect the loop boundary wires. This will prevent damage
to the transmitter due to surges.
• To prevent an unintended correction, after the Boundary
Flags have been placed, be sure to set the static correction
on the receiver collar back to level 1 tone only.
Summary of Contents for IN-GROUND FENCE PIG00-10773
Page 35: ...www petsafe net 35 ...
