6
1-800-732-2677
ID Tag Ring
Use the ID Tag Ring to attach your
dog’s ID tags to the collar. Simply
place the ID Tag Ring through one of
the holes on your collar. Make sure
to place the Ring far enough from
receiver housing so that tags will
not hit the Receiver or the Contact
Points.
Important: Do not attach a leash to the collar. This can
result in pulling the Contact Points too tightly against
your dog’s neck. Attach a leash to a separate, non-
metallic collar or harness, making sure the extra collar
does not put pressure on the Contact Points.
Important: For comfort, safety and effectiveness of product, please ensure
the following:
• Check the fi t to prevent excessive pressure by being able to insert one
fi nger between the Contact Point and your pet’s skin.
• Your pet must be carefully examined daily for any signs of a rash or sore.
• If a rash or sore is observed, discontinue the use of the Bark Control
Collar for a few days.
• If the condition persists beyond 48 hours, see your veterinarian.
• Your pet’s neck and the Contact Points must be washed weekly with a
wash cloth and mild hand soap, then rinsed thoroughly.
A condition called Pressure Necrosis, which is a devitalization of the skin
due to excessive and prolonged contact against the Contact Points, may
occur if the steps above are not followed.
Summary of Contents for Comfort-Fit Deluxe bark control
Page 1: ......
