7
- the wire which is coloured brown must be connected to
the terminal which is marked with the letter L or
coloured red.
Do not connect any wire to the terminal which is marked
with the letter E or by the earth symbol
, or coloured
green or green and yellow.
3. If a 13 A (BS 1363) plug is used it must be fitted with a
3 A fuse conforming to BS 1362 and be ASTA approved.
If any other type of plug is used, the appliance must be
protected by a 5 A fuse either in the plug or adapter or at
the distribution board.
If in doubt - consult a qualified electrician.
4. Never use the plug without closing the fuse cover.
The appliance complies with the European
directives 2006/95/EC, 2004/108/EC and
2005/32/EC.
At the end of its lifetime this product must not be
disposed of through the normal domestic waste, but
it should be handed to an assembly point for the
recycling of electrical and electronical appliances. You can
inquire about details at the local administration.
Subject to technical changes.
Proper dispose of the packaging material.
Cleaning and maintenance
Before cleaning always unplug the appliance and pour
out the remaining water. Never immerse the appliance
into water.
Do not use caustic or scouring cleansing agents. Clean
with a damp cloth, if necessary use some
washing-up liquid.
For UK use only
1. This product is supplied with a 13 A plug conforming to
BS 1363 fitted to the mains lead. If the plug is unsuitable
for your socket outlets or needs to be replaced, please
note the following. If the plug is a non-rewireable one,
cut it from the mains lead and immediately dispose of it.
Never insert it into a socket outlet as there is a very
great risk of an electric shock.
2. The replacement of the plug at the mains lead has to be
done according to the following instructions:
Important:
The wires in this mains lead are coloured in
accordance with the following code:
blue: Neutral
brown: Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
- the wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured black,
CE
