PESA VIDBLOX 3G-NE RX, User Manual

Page: 10 / 57

V
IDBLOX
3G-SL
AND
3G-NE RX M
ODULE
Publication 81-9059-0667-0, Rev. C
March 2011
Proprietary Information of PESA 2-5
2.3 S
PECIFICATIONS
VIDEO BROADCAST INPUT SPECIFICATIONS
Input Signal – Broadcast Standard SMPTE 424M, 292M*
Input Connector Style 75 Ohm BNC
LC Fiber SFP
Number of Inputs – BNC 2 (3G-SL), 1 (3G-NE)
Number of Inputs – Fiber** 2 (3G-SL)
, 1 (3G-NE)
Input Signal Format 1080p / 720p* / 1080i*
Input Data Rate 143Mbps to 3.0Gbps
Digital Inputs – BNC
Impedance
75 Ohm
Return Loss > 10dB, 1.5GHz to 3GHz
Input Signal Level 800 mV p-p, +/- 10%
Input Signal Polarity Non-Inverting
Input Jitter SMPTE 292M < 0.2 UI
SMPTE 424M
≤
0.3 UI
Compliant with RP-184
Input Cable Equalization 1.5Gbps – 100m
3.0Gbps – 80m
Based on Belden 1694A or Equivalent Cable
Digital Inputs – Fiber
NOTE: Optical devices used with Vidblox are class 1 laser products that meet the safety
regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
Output Data Rate 1.5Gbps to 3.0Gbps
Optical Input Wavelength Accepts 1270nm to 1610nm (1310nm optimal)
Input Power Min. -20dBm, Max. -1dBm
Loss Budget Approx. 9dB (assumes two optical couplers w/ 10km SM cabling)
Typical Operating Distances 9/125u estimated at 10Km (6.25 miles)
50/125u approx. 400m (1200ft)
62.5/125u approx. 200m (600ft)
NOTE: Listed operating distances are typical; actual distances may vary depending on factors such as
fiber type, bandwidth, connector splicing, dispersion, and environmental factors. Cable loss and other
interconnects can affect the total light loss between TX and RX paths.
Rise / Fall Time
SMPTE 292M
≤
270 ps
SMPTE 424M
≤
135 ps
Overshoot < 10% of amplitude (max.)
Alignment Jitter SMPTE 292M < 0.2 UI
SMPTE 424M
≤
0.3 UI
Timing Jitter SMPTE 292M < 1.0UI
SMPTE 424M
≤
2.0UI
*3G-SL RX Module Only
**If equipped with SFP fiber receiver device