EPD EXT2 with Cypress PSoC 4 BLE module
5
[User’s Guide] Rev.01
1.2.2
EPD Extension Board Gen2 (EXT2 board)
Figure 1-1 EPD Extension Board Gen2 (front view)
The EXT2 board supports driving most of the PDI’s EPD panels with the 40 and 24/34 pins
FPC connector. The EXT2 board has embedded EPD driving circuit which are soldered at the
backside.
eTC and iTC will be explained later.
Figure 1-2 EPD Extension Board Gen2 (rear view)
There are two 20 pins connectors at the backside of EXT2 board is able to stack on TI
LaunchPads.
40 pins connector
for eTC driver displays
34 pins connector
for iTC driver displays
20 pins connector
for stacking on TI LaunchPads
24 pins connector
for iTC driver displays
