EPD EXT2 with Cypress PSoC 4 BLE module
15
[User’s Guide] Rev.01
2.2
Programming firmware to Cypress PSoC 4 BLE kit
Before you proceed to get started with EXT2 kit, you have to download the EXT2 project
source code from PDI website in advance.
Download link:
http://www.pervasivedisplays.com/kits
(Cypress PSoC 4 BLE kit).
You will be asked to fill out your basic contact information and then you will receive an email
to show the download link.
Please download and extract it (.RAR file format usually).
2.2.1
Download Software PSoC Creator
Follow these steps to install the BLE Pioneer Kit software:
1. Download the kit software from www.cypress.com/CY8CKIT-042-BLE. The software is
available in the following formats:
a. CY8CKIT-042-BLE Kit Complete Setup: This installation package contains the files related
to the BLE Pioneer Kit. However, it does not include the Windows Installer or Microsoft .NET
framework packages. If these packages are not on your computer, the installer directs you
to download and install them from the Internet.
b. CY8CKIT-042-BLE Kit Only Package: This executable file installs only the BLE Pioneer Kit
contents, which include code examples, hardware files, and user documents. This package
can be used if all the software prerequisites (listed in step 5) are installed on your computer.
c. CY8CKIT-042-BLE DVD ISO: This file is a complete package, stored in a DVD-ROM image
format, that you can use to create a DVD or extract using an ISO extraction program such
as WinZip or WinRAR. The file can also be mounted similar to a virtual CD/DVD using virtual
drive programs such as ‘Virtual CloneDrive’ and ‘MagicISO’. This file includes all the required
software, utilities, drivers, hardware files, and user documents.
2. Click Install CY8CKIT-042-BLE Kit to start the installation, as shown in Figure 2-2.
Figure 2-2 Installer Screen
