6
•
Position air chamber(s) with base of hose connection
facing down.
•
Carefully slide the white connector(s) and air chamber
hoses through the hole(s) at the head of the bed.
•
Position air chamber(s) evenly inside frame.
3
5
6
4
•
If dual chambers, insert first chamber to one side of the
mattress frame as shown. (if single chamber, insert single
chamber)
•
Place air control unit under head of bed frame. (Do not
connect power to the air control unit until step 6)
•
Connect the air chamber hose(s) to the air control unit.
•
Make sure, the left side air chamber attaches to the
left pump hose and same for the right side. There are
markings for left “L” and right “R” on the air control unit.
•
Pump will accept connection for
one minute after power up.
•
Press M1/M2 at the same time for
3 seconds to enter pairing mode
•
Pair will display, then counts
down from 30 to 0.
•
If power is lost, remotes will
connect automatically when
power is restored.
Press both 3 seconds
