PERSEE T3, Operation & Instruction Manual, Page: 78 / 135

T3 / T3M Instruction Manual
76
Figure 4-49
●
Parameter Setting Page
·Abs/T%/Es: choose the measuring mode between Abs, T% and Es.
·Wavelength: input a specified wavelength point value
·Interval: time interval between each sampling.
·Total time: total scanning time, no less than the time interval
·Y range: coordinates displayed on Y axis during scanning.
·+ve Slope/-ve Slope: display whether to choose fading measurement or not.
●
Instrument Setting Page
·Average times: can be selected from 1, 2, 4, 8 to 16.
·Integrating time: set the integrating time, the longer of integrating time, the
higher of energy.
·Gain: set the amplifier times (under Es mode).
●
Lamp Setting Page
·Lamp on/Lamp off: set the status of the lamp.
·Energy balance: adjust the energy of tungsten lam. (After changing
measurement assembly click this button to satisfy requirement)
●
Sample information page
Set the information of sample
Press button to enter the view page and view the saved measurement