manualshive.com logo in svg

PERSEE T3, Operation & Instruction Manual, Page: 10 / 135

Share
Download
PERSEE T3 Operation & Instruction Manual Download Page 10

T3 / T3M Instruction Manual 

 

8 

 

Chapter 1 Introduction 

1.1 Uses 

T3

 is a small portable quick-test instrument, whose measurement speed is very 

fast. The dimension of the instrument is small, and it’s light. It is convenient for 
carrying and manually operation. It can not only be used in the lab, but also 
special for the wild environment monitor and on-site real time detection. The 
instrument is provides with the function of spectrum scanning, kinetics, 
quantitative measurement and photometric measurement, so the application 
field of it is so wide. 
The measuring method is based on the Lamber-Beer’s Law, which is found on 
the absorption to light of the material. 
 

1.2 Structures 

The 

T3

 system is consist of main unit, cell holders, test tube holders and fiber 

probe. 
 

1.3 Characters 

ARM11 high-speed embedded processor and embedded real-time operational 
system WINCE6.0 are used for the core control part of the 

T3

, which provides 

Summary of Contents for T3








































































































































Reviews:

No comments