Perry Electric 1TX RX01/P, Manual, Page: 4 / 60

1 - INSTRUCTIONS FOR THE INSTALLER
DIMENSIONS
RESET
ON
133
90
25
RESET
ON
Burner
Receiver
Chronothermostat
Fig. 1.i
INSTALLATION EXAMPLE
OK
RESET
ON
RESET
ON
INSTALLATION
Fig. 2.i
4
G
B
E
N
1.1 - INSTRUCTIONS AND REQUIREMENTS FOR INSTALLING THE RECEIVER
Install the receiver at a height that allows the antenna to stick up above any nearby metal container (boiler, expansion tanks, metal
cabinets); avoid positioning the antenna near cables and electrical panels (fig. 1.i - fig. 2.i)
Cabinets, walls and slabs containing metal can limit the operation of the product
.
This system is incompatible with radio products a working on the same frequency using permanent
emission mode.
Instructions relative to the structure of realizable systems and the assignment of areas to individual timer-thermostats or
thermostats are shown in the technical documentation for the transmitter devices (chronothermostats and/or thermostats).
Important
: installation and electrical connections of devices and appliances must be implemented only by a qualified
electrician and in compliance with current regulations. The manufacturer declines any liability in connection with the use of
products subject to special environmental and/or installation standards. The examples shown in this document are of principle.