11
O
2
asis User Guide
POWERING THE DEVICE
To connect the device to AC power, complete the following steps:
1
Ensure the blue latch is closed.
2
Plug the prongs of the power supply into a standard electrical outlet.
3
Plug the barrel connector of the power supply into the
2
POWER
cord connector on the latch side of the
device.
4
When the device is powered on, one or more of the LED lights will be
illuminated.
Warning:
Be sure to periodically inspect the power adapter cord for signs
of damage or wear. Immediately discontinue use and replace if damaged
Contact your care provider, licensed distributor, or O2asis Customer Service
for replacement.
Note:
Make sure that the Water Well consumable cartridge is securely
latched to the base unit before plugging in the power cord.
Note:
The O
2
asis Humidifier device will continue to humidify the airflow
even when disconnected from the power supply. Heating functions will not
be available without power. Therefore, without power, it will be possible to
get condensation in the breathing tube.
Note:
The O
2
asis Humidifier device does not have a power button. In the
event of a malfunction, unplug the device to disconnect power.
Note:
In the event of a power failure, unplug the device from the outlet until
power is restored. Then plug the unit back in and check to make sure the
device is functioning properly. The device will work to humidify the oxygen
supply without power. However, no heat will be supplied to the gas path-
way.
PP-19-1 REV. 15
