X
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum 1½ x
3½ in. (38 x 89 mm)
● Stud center must be verified
●Ensure the wall plate [01] is securely fastened to the wall before
continuing to the next step.
●DONOT USE ANCHOR [A3] FOR THIS STEP!
●Avoid potential personal injury or property damage! DO NOT over-tighten the
lag screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are
pulled firmly against the wall plate.
2-2
Position the wall plate [01] at your desired
height and line up the holes with your stud
center line. Level the
wall plate [01]
and mark
the holes.
2-1
Use a stud finder (not included) to
locate wood studs or use an awl (not
included) to verify the edges. Mark the
edge and center locations.
Awl
(Not lncluded)
Step 2 Attach the Wall Plate [01] to Wall
Step 2A Wood Stud Option
For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B
WARNING:
01
01
02
03
04
05
06
07
08
09
