WARNING:
●Avoid potential personal injury or property damage! DO NOT over-tighten the lag
screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are pulled firmly
against the wall plate.
●Ensure the wall plate [01] is securely fastened to the wall before
continuing to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Mount the wall plate directly onto the concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
● Never drill into the mortar between blocks
Wall
Anchor
A3
Step 2B Solid Concrete or Concrete Block Option
2-4
3/8in.(10mm)
Socket Wrench
(Not included)
2-3
Drill 2 pilot holes using a 5/32 in.(4 mm)
diameter drill bit. Make sure the depth is
not less than 2 23/64 in.(60mm).
ø5/32 in.(4mm)
2 23/64 in. (60mm)
Install the wall plate using lag screws [A1]
and washer [A2]. Tighten the lag screws [A1]
only until the washers [A2] are pulled firmly
against the wall plate.
01
A1
A2
01
02
03
04
05
06
07
08
09
