Perle 10/100/1000 Media Converter Module – Installation Guide
2
Overview
This document contains instructions necessary for the
installation and operation of the Perle 10/100/1000
Media Converter Module(s) (C-1110 and CM-1110) to
be used in conjunction with a Perle MCR chassis. The
C-1110’s are unmanaged media converter modules,
and the CM-1110’s are the managed versions. These
products convert a 10/100/1000Base-T cable
connection (copper) to a 1000Base-X connection
(fiber). The fiber connection can be either single mode
(SM) or multimode (MM) and can operate over different
wavelengths and distances, depending on the model
selected (see table below).
Model
Connector
(xx)
Mode - Distance
Wavelength
C-1110-M2xx05
CM-1110-M2xx05
SC/ST/LC
MM - 550 m/1804 ft.
850/850 nm
C-1110-M1SC05U
CM-1110-M1SC05U
SC
MM -
550 m/1804 ft
1310/1550
C-1110-M1SC05D
CM-1000-M1SC05D
SC
MM -
550 m/1804 ft
1550/1310
C-1110-M2xx2
CM-1110-M2xx2
SC/ST/LC
MM - 2 km/1.2 mi.
1310/1310 nm
C-1110-S2xx10
CM-1110-S2xx10
SC/ST/LC
SM - 10 km/6.2 mi.
1310/1310 nm
C-1110-S1SC10U
CM-1110-S1SC10U
SC
SM - 10 km/6.2 mi.
1310/1490 nm
C-1110-S1SC10D
CM-1110-S1SC10D
SC
SM - 10 km/6.2 mi.
1490/1310 nm
C-1110-S1SC20U
CM-1110-S1SC20U
SC
SM - 20 km/12.4 mi.
1310/1490 nm
C-1110-S1SC20D
CM-1110-S1SC10D
SC
SM - 20 km/12.4 mi.
1490/1310 nm
C-1110-S2xx40
CM-1110-S2xx40
SC/ST/LC
SM - 40 km/25 mi.
1310/1310 nm
