Perle 10/100/1000 Media Converter Module – Installation Guide
13
front of the Chassis. Light pressure may be needed
to seat the module. Do not force the module as you
might cause some damage. If there is resistance,
remove the module, check the module connector for
damaged or incorrectly aligned pins, if there is no
damage, retry to insert the module.
6. Tighten the captive retainer screw to ensure the
Media Converter Module is locked in place.
7. Remove the dust cap from the fiber connector and
connect the fiber and copper cables.
Removing Media Converter Modules
•
Loosen the captive retainer screw on the front of
the Media Converter Module and gently pull the
Media Converter Module out.
•
If not inserting a replacement, cover the opening
slot with a face plate and secure the screw.
Installing the SFP Fiber Module
•
C-1110-SFP and CM-1110-SFP require an SFP
fiber module. Locate appropriate fiber module
and insert into opening.
