Perle 10/100/1000 Media Converter Module – Installation Guide
19
4. Connect the fiber cable to both Media Converters.
The LKF LED indicates good fiber connection. If no
LKF LED then check the fiber cabling.
5. Return converters to their desired configuration.
Method 2:
Configure the remote Media Converter for loopback
mode. The LKF LEDs on both Media Converters
Modules should be lit. Data should pass through the
local converter, over the fiber connection to the remote
Media Converter. At the remote Media Converter, the
data will be looped back and passed through the fiber,
back to the local Media Converter Module and passed
to the copper link.
