This document is printed from SPI². Not for RESALE
84
SEBU8311-02
Maintenance Section
Fuel System Filter - Replace
The fuel system will need to be primed after the
new
fi
lter is installed. Refer to this Operation and
Maintenance Manual, “Fuel System - Prime”.
Fuel Filter with Element
1.
Close the fuel supply valve (1).
g01334893
Illustration 57
Typical example
2.
Clean the outside of the fuel
fi
lter assembly.
3.
Loosen the locking ring (2).
4.
Remove the casing (3) for the
fi
lter and the
element. Ensure that any
fl
uid is drained into a
suitable container.
g01334895
Illustration 58
Typical example
Note:
Do not
fi
ll the fuel
fi
lter with fuel. The fuel will
not be
fi
ltered and the fuel could be contaminated.
Contaminated fuel can damage your fuel system.
5.
Assemble the following items: seal (5),
fi
lter
element (6) and casing (3).
6.
Install the assembled items to the
fi
lter base (4).
7.
Install the locking ring (2) to the
fi
lter head. Rotate
the locking ring in order to lock the assembly.
The fuel system will need to be primed after the
new
fi
lter is installed. Refer to this Operation and
Maintenance Manual, “Fuel System - Prime”.
Fuel Filter with Priming Pump
1.
Close the fuel supply valve.
2.
Clean the outside of the fuel
fi
lter assembly.