Perkins 402D, Operation And Maintenance Manual, Page: 40 / 98

This document is printed from SPI². Not for RESALE
40 SEBU8311-02
Maintenance Section
Re fi ll Capacities
403D-17 Engine
Table 15
403D-17 Engine
Re fi ll Capacities
Compartment or System Minimum Maximum
Crankcase Oil Sump
(1)
4.5 L
(4.8 qt)
6 L
(6.3 qt)
Total Lubrication System
(2)
(1) These values are the approximate capacities for the crankcase
oil sump which includes the standard factory installed oil fi lters.
Engines with auxiliary oil fi lters will require additional oil. Refer
to the OEM speci fi cations for the capacity of the auxiliary oil
fi lter.
(2) The Total Lubrication System includes the capacity for the
Crankcase Oil Sump plus the capacity of factory installed oil
fi lters and other fi lters added to the lubrication system. Enter
the value for the capacity of the Total Lubrication System in
this row.
404D-15 Engine
Table 16
404D-15 Engine
Re fi ll Capacities
Compartment or System Minimum Maximum
Crankcase Oil Sump
(1)
3.9 L
(4.1211 qt)
5.6 L
(5.9175
qt)
Total Lubrication System
(2)
(1)
These values are the approximate capacities for the crankcase
oil sump which includes the standard factory installed oil fi lters.
Engines with auxiliary oil fi lters will require additional oil. Refer
to the OEM speci fi cations for the capacity of the auxiliary oil
fi lter.
(2)
The Total Lubrication System includes the capacity for the
Crankcase Oil Sump plus the capacity of factory installed oil
fi lters and other fi lters added to the lubrication system. Enter
the value for the capacity of the Total Lubrication System in
this row.
404D-22, 404D-22T and 404D-22TA
Engines
Table 17
404D-22, 404D-22T and 404D-22TA Engines
Re fi ll Capacities
Compartment or System Minimum Maximum
Crankcase Oil Sump
(1)
8.9 L
(9.4 qt)
10.6 L
(11.2 qt)
Total Lubrication System
(2)
(1) More than one style of sump may be used on these engines.
Use these values to estimate the re fi ll capacity. Use the engine
oil level gauge to fi ll the engine to the correct oil level. Record
the result in this table. These values are the approximate
capacities for the Crankcase Oil Sump which includes the
standard factory installed oil
fi lters. Engines with auxiliary oil
fi lters will require additional oil. Refer to the OEM speci fi cations
for the capacity of the auxiliary oil fi lter.
(2)
The Total Lubrication System includes the capacity for the
Crankcase Oil Sump plus the capacity of factory installed oil
fi lters and other fi lters added to the lubrication system. Enter
the value for the capacity of the Total Lubrication System in
this row.
Cooling System
To maintain the cooling system, the Total Cooling
System capacity must be known. The approximate
capacity is for the engine cooling system. External
System capacities will vary among applications.
Refer to the OEM speci fi cations for the External
System capacity. This capacity information will be
needed in order to determine the amount of coolant
that is required for the Total Cooling System.
402D-05 Engine
Table 18
402D-05 Engine
Re fi ll Capacities
Compartment or System
Liters
Quarts
Engine Only 1.1 1.2
External System Per OEM
(1)
Total Cooling System
(2)
(1) The External System includes a radiator or an expansion
tank with the following components: heat exchanger and
piping. Refer to the OEM speci
fi cations. Enter the value for the
capacity of the External System in this row.
(2)
The Total Cooling System capacity includes the capacity of
the Engine plus the External System. Enter the value for the
capacity of the Total Cooling System in this row.