SEBU8603-01
99
Maintenance Section
Fuel System Primary Filter (Water Separator) Element - Replace
2.
Place a suitable container under the water
separator in order to catch any fuel that might spill.
Clean up any spilled fuel. Clean the outside body
of the
fi
lter assembly.
3.
Make a temporary Mark (A) across the
fi
lter before
the assembly is removed.
g02148376
Illustration 62
Typical example
4.
Install a suitable tube onto drain (3). Open
the drain valve (2). Rotate the drain valve
counterclockwise. Two full turns are required.
Loosen vent screw (1).
Note:
Two complete rotations of the valve will release
the valve from the
fi
lter element.
5.
Allow the fuel to drain into the container. Remove
the tube and install the valve into the
fi
lter element.
Engage the threads of the valve into the
fi
lter
element. Do not secure the valve.
6.
Tighten the vent screw (1) securely . Remove the
wiring harness from connection (4).
7.
Remove the
fi
lter bowl (6). Rotate the
fi
lter
assembly counterclockwise in order to remove
the
fi
lter assembly. Use a suitable tool in order to
remove the
fi
lter assembly.
g02148402
Illustration 63
Typical example
8.
Rotate the
fi
lter element counterclockwise and
remove the
fi
lter element (5). Clean the
fi
lter bowl.