Illustration 52
g06423641
Typical example
1.
Install new O ring seal (5) onto new filter canister
(2).
2.
Install O ring (6) onto the screw (7) on bowl (3).
Assemble bowl (3) to filter canister (2).
3.
Install a new O-ring (5) onto filter canister (2).
4.
Align the filter canister (2) with the opening on the
fuel filter base (4). Push the canister directly up
and rotate the clamp ring (1) to the right. Ensure
the filter canister (2) is securely in place.
5.
Turn the fuel supply valve (if equipped) to the ON
and check for leaks around the filter.
6.
Remove the container below the filter assembly
and dispose any diesel fuel spillages in
accordance with local regulations.
i07756868
Fuel
System
Primary
Filter/
Water
Separator
-
Drain
Fuel leaked or spilled onto hot surfaces or electri-
cal components can cause a fire. To help prevent
possible injury, turn the start switch off when
changing fuel filters or water separator elements.
Clean up fuel spills immediately.
NOTICE
The water separator is not a filter. The water separa-
tor separates water from the fuel. The engine should
never be allowed to run with the water separator
more than half full. Engine damage may result.
72
M0105633-01
Maintenance Section
Fuel System Primary Filter/Water Separator - Drain
