21
PerkinElmer
Optoelectronics
The serial command to set the gain is "s g
n
". Here
n
is an interger between 0 and
7. This corresponds to a gain adjustment range of 0dB to 24.5dB in steps of
3.5dB.
Table 8 Video Gain Selection (Camera Link Model)
Value Camera Gain Value (dB)
0
0.0
1
3.5
2
7.0
3
10.5
4
14.0
5
17.5
6
21.0
7
24.5
6.4.4 Video Gain (LVDS Model)
Video gain is set by the control lines GAIN0 and GAIN1 present on the LVDS
connector. The video gain may be adjusted while the camera is operating and
does not require camera power cycling for gain changes to take effect.. This
model allows a gain adjustment range of 0dB to 18dB in steps of 6dB.
Table 9 Video Gain Selection (LVDS Model)
GAIN0
GAIN1
Camera Gain Value (dB)
HIGH
LOW
0.0
LOW
HIGH
6.0
HIGH
HIGH
12.0
LOW
LOW
18.0
6.4.5 Camera Powerup
1.
Select Master Mode as required for specific model.
2.
Turn on the camera power.
Summary of Contents for RETICON LD3500 Series
