PerkinElmer
Optoelectronics
4
3 Receiving and Inspecting Your Camera
3.1 Unpacking Your Camera
Inspect the received shipping container for any damage. If a shipping container
shows visible signs of damage, it should be retained until all of the contents have
been checked for completeness and absence of damage. Unpack the received
shipping container and account for each item listed on the accompanying packing
list. Visually inspect each item for absence of damage. In the event of damage,
notify the shipper and the PerkinElmer shipping department. Retain all shipping
materials for shipper inspection.
Your first LD3500 shipping container in accordance with the enclosed packing
list should contain the following:
1.
LD3500 camera in static resistant envelope with unbroken seal.
2. Users Manual
3.2 Customer Supplied Components
The following components, not supplied with the camera, are required for
installation and operation of the camera in your particular machine vision
environment.
1.
Camera Lens + Extender (Available by contacting PerkinElmer)
2.
Camera mounting hardware
3.
PC with Frame Grabber and digital I/O
4.
Power Supply
5.
Interface Cable (Available by contacting PerkinElmer)
6.
Web illumination source
7.
Web speed and light control.
This is not a complete list of items that may be required for your specific
application, but represents a minimum required to verify camera operation.
Note:
The majority of the customer supplied items are peculiar to each installation and
may require custom fabrication. Guidelines for fabrication are provided in
Appendix A.
Summary of Contents for RETICON LD3500 Series
