PerkinElmer Lambda 365 User Manual Download Page 60

Page: 60 / 70

60 . Lambda 365 Users Guide

Single Cell Peltier Holder, Controller

Control the temperature of a single 10 mm pathlength rectangular cell between -5 and 100

℃

Peltier control offers fast ramping with recirculating liquid for exceptional temperature control.

Integrated purging capability can be used to decrease condensation. This accessory includes

a temperature probe, temperature controller, Peltier accessory and all accessories necessary

for its operation and connection to the instrument. This accessory is controlled by UV Express

software.

with heated reference without heated reference

Peltier Controller

6-Position Peltier Controlled Cell Changer, Controller

Control the temperature of up to six, 10 mm pathlength rectangular cell between -5 and

100

℃

. Peltier control offers fast ramping with recirculating liquid for exceptional temperature

control. Integrated purging capability can be used to decrease condensation. This accessory

includes two temperature probes, a temperature controller, Peltier Temperature Control Unit

and all accessories necessary for its operation and connection to the instrument. This

accessory is controlled by UV Express software.

Summary of Contents for Lambda 365







































































Search results

Summary of Contents for Lambda 365

Reviews:

Related manuals for Lambda 365

Brands by name

Popular brands

PerkinElmer Lambda 365, User Manual

Search results

Summary of Contents for Lambda 365

Reviews:

Related manuals for Lambda 365

Brands by name

Popular brands