Peri 117465, Translation Of The Original Instructions For Use

Page: 8 / 46

6
PERI products have been designed
for exclusive use in the industrial and
commercial sectors by suitably trained
personnel only!
The Hydraulic Head Spindle Device VST
is designed for perpendicularly accom-
modating vertical loads as well as the
brief lifting and controlled lowering of
individual loads up to max. 700 kN on
the VARIOKIT Heavy-Duty Shoring
Tower VST.
The Hydraulic Head Spindle Device VST
consists of:
– Head Spindle VST 100,
– Hydraulic Unit VST.
Only the hydraulic unit described in
these Instructions for Use may be used.
The installation and position of the
Hydraulic Head Spindle Device VST
are provided in the corresponding
Instructions for Assembly and Use of
the system.
The Hydraulic Head Spindle Device VST
is not approved for transporting persons.
Intended use
The product described here corresponds
to the relevant provisions and regulations
of Machinery Directive 2006/42/EC.
These Instructions for Use provide the
basis for the risk assessment. The risk
assessment is compiled by the contrac-
tor. The Instructions for Use do not
replace the risk assessment!
Application of the Hydraulic Head
Spindle Device VST:
ƒ
Within the permissible load-bearing
capacity, see Technical Data.
ƒ
Within the permissible temperature
limits of -20 °C to +40 °C.
ƒ
In good working order.
ƒ
If correctly assembled.
Introduction
Hydraulic Head Spindle Device VST
Translation of the Original Instructions for Use
EN_BA_Hydr_Kopfspindeleinheit_VST.indb 6 01.04.16 11:25