35
1.2
Application
Hydraulic Head Spindle Device VST
Translation of the Original Instructions for Use
Dismantling the crossbeam
Procedure:
1. Remove crossbeam (3). (Fig. 30)
2. Loosen the four bolts (1.7) of the
fork head (1.1) by turning them
counter-clockwise, and then remove.
(Fig. 31)
3. Remove spacer plates (1.6).
4. Extend centering jaws (1.2) by moving
as far as possible. (Fig. 32)
5. Position spacer plates (same number
respectively) on the two outer sides
of the fork head (1.1). Secure spacer
plates using four bolts. (Fig. 33)
Fig. 33
Fig. 32
Fig. 31
Fig. 30
3
1.6
1.7
1.7
1.1
EN_BA_Hydr_Kopfspindeleinheit_VST.indb 35
01.04.16 11:25
Summary of Contents for 117465
Page 27: ...25 Hydraulic Head Spindle Device VST Translation of the Original Instructions for Use...
Page 44: ...42...
Page 45: ...43...
