SYSTEM RESET
If the radio fails to operate correctly, or some digits on the display are missing or
incomplete, carry out the following procedure.
1. Press the
On/Off button
to switch on the radio.
2. Press the
Menu button
,
3. Rotate the
Tuning knob
until the display shows “System”. Press the
Tuning knob
.
4. Rotate the
Tuning knob
until the display shows “Factory reset”. Press the
Tuning
knob
.
5. Rotate the
Tuning knob
to select between “Yes” or “No”.
Select “Yes” if you wish to reset the radio, otherwise, select “No”.
6. Press the
Tuning knob
to cause the factory reset.
7. A full reset will be performed. All presets and the station list will be erased. All
settings will be set to the default values.
The display will show “WELCOME” for a few seconds, and then
the radio will automatically perform an auto scan of the Band III DAB channels and
the FM band, the display will show “ATS setting”.
In case of malfunction due to electrostatic discharge; reset the product as above to
resume normal operation. If you are not able to perform the reset operation as above,
remove and reconnect the power supply.
“Under the environment with Conducted Immunity disturbance / Radiated Immunity, the
sample may malfunction. It will automatically recover to normal when the Conducted
Immunity disturbance / Radiated Immunity stopped.”
18
GB
