16
GB
SETTING THE CLOCK
The clock can only be set when the radio is in standby mode. If no buttons are pressed
for 5 seconds, the radio will exit the clock setup and the setting is cancelled.
1. Press and hold the
Time Set knob
for 12 seconds until the hour digits flash on the
display.
2. Rotate the
Time Set knob
to set the hour.
3. Press the
Time Set knob
to confirm, the minute digits flash.
4. Rotate the
Time Set knob
to set the minute.
5. Press the
Time Set knob
to confirm, the day flashes on the display.
6. Rotate the
Time Set knob
to set the current day.
7. Press the
Time Set knob
to confirm, the month flashes.
8. Rotate the
Time Set knob
to set the current month.
9. Press the
Time Set knob
to confirm, the year will then flash on the display.
10. Rotate the
Time Set knob
to set the current year.
11. Press the
Time Set knob
to confirm, “SYNCLOCK ON” flashes.
12. Rotary the
Time Set knob
to select “SYNCLOCK ON” or “SYNCLOCK OFF”.
13. Press the
Time Set knob
to confirm and finish the clock setting.
RDS time synchronisation
If “SYNCLOCK ON” is selected, the symbol “ ” will show on the clock display.
Some RDS stations transmit a time signal. If reception is good and you have
selected the “SYNCLOCK ON” option during the time setting, the time will be
automatically updated (“ ” flashes on the display). Time synchronisation can take
several minutes. The automatic time setting is always activated when the radio is
switched from standby to FM broadcasting and receives a RDS station.
LOUDNESS
The Loudness function enables to get compensation on lower and higher frequency.
The effect will be more audible when the radio is in a lower volume level (Dynamic
Loudness).
1. Press the
Loudness button
to enable the loudness, the display shows “Loudness
On”.
2. Press the
Loudness button
again to disable the loudness, the display shows
“Loudness Off”.
