Page
8
of
2
6
6 Assembly
Place the PASTA MAKER on a dry, level surface near an electrical
outlet. Ensure the switches are all on the Off (O) Position. Do Not
Plug in.
1. Place the Mixing Container onto the Base
until it sits flush against the Base and push to
the back so it is hard up against the back
wall.
The unit will not work if the Mixing Container
is not properly assembled to the Base or if it
is not flush against back wall of base.
2. Insert the White Screw into the Face Plate
3. Slide the Mixing Blade onto the white screw shaft by lining up the
peg in the Mixing Blade hole with the grooves in the white screw
shaft.
4. Insert the assembled Mixing Blade
and White Screw into the Mixing
Container so the Screw shaft fits into
the hole in the back of the Base.
