5
INSTALLATION INSTRUCTIONS
LOCATION
• The air conditioner should be placed on a firm
surface to minimize noise and vibration. For
safe and secure positioning, place the unit on a
smooth, level floor strong enough to support it.
• The unit has casters to aid placement; it should
only be rolled on smooth, flat surfaces. Use
caution when rolling on carpeted surfaces. Do not
attempt to roll the unit over objects.
• The unit must be installed near a grounded plug;
the Collection Tray Drain (found on the back of the
unit) must be accessible.
• DO NOT cover the Intakes, Outlets or Remote
Signal Receptor of the unit, as this could prevent
the unit from running efficiently and can damage
the unit.
• Allow at least 12 inches (30cm) of space from the
wall for efficient air-conditioning. (See Fig 4.)
WINDOW SLIDER KIT INSTALLATION
Your window slider kit has been designed to fit
most standard “vertical” and “horizontal” window
applications. However, it may be necessary for you to
improvise or modify some aspects of the installation
procedures for certain types of windows. Please
refer to Fig. 5 and Fig. 6 for minimum and maximum
window openings. Window slider kit length can be
fixed with a bolt. (See Fig. 7.)
NOTE:
If the window opening is less than 2 ft., cut
the extension piece (See Fig. 7) shorter so the
kit properly fits in the window opening. Only cut
if absolutely necessary. Never cut the hole in the
window slider kit.
CAUTION
Make sure there are no obstacles around the air
outlet of the exhaust hose (in the range of 20 in. /
500mm) in order for the exhaust system to
work properly.
The exhaust hose and adapter must be installed
or removed in accordance with the usage mode as
indicated below:
COOL or AUTO mode
Install Hose
FAN or DRY mode
Remove Hose
12 in.
(30 cm)
12 in.
(30 cm)
FIG. 4
FIG. 6
FIG. 5
FIG. 7
Vertical
Window
Horizontal
Window
Extension
Piece
Window Slider Kit
Bolt
Window Slider Kit
Minimum: 2 ft. (67cm)
Maximum: 4 ft. (123 cm)
Window Slider Kit
Minimum: 2 ft. (67cm)
Maximum: 4 ft. (123 cm)
