13
AUTO-RESTART
If the unit breaks off unexpectedly due to the power
being cut, it will restart with the previous function
setting automatically when the power is restored.
WAIT 3 MINUTES BEFORE RESUMING OPERATION.
After the unit has stopped, operation cannot be
restarted in the first 3 minutes. This is to protect the
unit. Operation will automatically start after
3 minutes.
AIR FLOW DIRECTION ADJUSTMENT
The louvers can be adjusted manually. (Fig. 25.) Use
the tab to gently adjust louvers up and down so air
flow is pointed in the desired direction. Operating the
unit with the louvers closed (or only slightly open) will
not allow the unit to cool properly.
ERROR AND PROTECTION CODES
E1 - Room Temperature Sensor Error-
Unplug the unit and plug it back in. If error
repeats, call Consumer Services.
E2 - Evaporator Temperature Sensor Error-
Unplug the unit and plug it back in. If error
repeats, call Consumer Services.
E3 - Condenser Temperature Sensor Error-
Unplug the unit and plug it back in. If error
repeats, call Consumer Services.
E4 - Display Panel Communication Error-
Unplug the unit and plug it back in. If error
repeats, call Consumer Services.
EC - Refrigerant Leakage Detection Malfunction-
Unplug the unit and plug it back in. If error
repeats, call Consumer Services.
E7 - Zero-Crossing Malfunction-
Unplug the unit and plug it back in. If error
repeats, call Consumer Services.
P1 - Bottom Tray is Full-
Remove bottom drain plug and empty the
collected water into a floor drain, outdoors,
or into a shallow pan. Carefully tilt unit back
slightly to assist the water in draining. If error
does not clear after emptying, call
Consumer Services.
PERFECT AIRE CONSUMER SERVICES
TOLL FREE NUMBER: 1-844-472-2473
Tab
FIG. 25
