12
OPERATING INSTRUCTIONS
NOTE:
Fan speeds, SLEEP mode, and FOLLOW ME
feature can only be adjusted with the remote control.
NOTE:
When selecting a mode on the unit’s display,
fan speed cannot be selected. The fan speed goes to
“auto” by default.
COOL mode
• Press the “MODE” button until the “COOL”
indicator light comes on.
• Press the “+” or “-” button to select your desired
room temperature. The temperature can be set
within a range of 62°F~86°F/17°C~30°C.
• Press the “FAN SPEED” button on the remote
control to choose the fan speed.
FAN mode
• Press the “MODE” button until the”FAN “ indicator
light illuminates.
• Press the “FAN SPEED” button on the remote
control to choose the fan speed. The temperature
cannot be adjusted.
• Remove exhaust hose and slider.
DRY mode
• Press the “MODE” button until the “DRY” indicator
light comes on.
• Under this mode, you cannot select a fan speed or
adjust the temperature. The fan motor operates at
LOW speed only.
• Keep windows and doors closed for the best
dehumidifying effect.
• Remove exhaust hose and slider when in this
mode.
SLEEP/ECO mode
NOTE:
This feature can be activated from the remote
control ONLY.
To activate SLEEP feature, the set temperature
will increase by 2°F(1°C) in 30 minutes. The set
temperature will then increase by another 2°F(1°C)
after an additional 30 minutes. This new temperature
will be maintained for 7 hours before it returns to
the originally selected temperature. This ends the
SLEEP mode and the unit will continue to operate as
originally programmed.
NOTE:
This feature is unavailable under FAN or
DRY mode.
FOLLOW ME feature
NOTE:
This feature can be activated from the remote
control ONLY.
The remote control serves as a remote thermostat
allowing for the precise temperature control at its
location. To activate the FOLLOW ME feature, point
the remote control toward the unit and press the
FOLLOW ME button. The remote displays the actual
temperature at its location. The remote control will
send this signal to the air conditioner in 3 minute
intervals until the FOLLOW ME button is pressed
again. If the unit does not receive the FOLLOW ME
signal during any 7 minute span, the unit will beep to
indicate the FOLLOW ME mode has ended.
Auto-Restart
If the unit breaks off unexpectedly due to the power
being cut, it will automatically restart with the
previous function setting when the power resumes.
*WAIT 3 MINUTES BEFORE RESUMING OPERATION.
Operation will automatically start after 3 minutes (once
the unit is powered on). This is to protect the unit.
Air Flow Direction Adjustment
• Adjust the air flow direction manually by using the
tab to move the louvers up or down.
• Do not place any heavy objects or other loads on
the louver; doing so will cause damage to the unit.
• Keep the louver fully opened during all operations.
