8
STEP 7:
INSTALL WEATHER STRIPPING
NOTE:
This step applies to Energy Star rated
units only.
In order to minimize air leaks between the room air
conditioner and the window opening, install weather
stripping into any gaps as you see necessary by
trimming the weather stripping to the desired length,
peeling off the protective backing and filling these
gaps. (Fig. 14)
IF AC IS BLOCKED BY A
STORM WINDOW
Add wood as shown in Fig.15, or remove storm
window before air conditioner is installed.
If storm window frame must remain, be sure the
drain holes or slots are not caulked or painted shut.
Accumulated rain water or condensation must be
allowed to drain out.
REMOVING AC FROM WINDOW
● Turn AC off, and disconnect power cord.
● Remove sash seal from between windows, and
unscrew safety sash lock.
● Remove screws installed through frame and
frame-lock.
● Remove the Insulation Panels and close (slide) side
accordion panels into frame.
● Keeping a firm grip on air conditioner, raise sash
and carefully remove.
● Be careful not to spill any remaining water
while lifting unit from window. Store parts WITH
air conditioner.
FIG. 14
FIG. 15
Sash
Storm window
frame or other
obstruction.
1½
″
min
(38 mm)
Board thickness
as required, for
proper pitch to
rear, along entire
sill. Fasten with
nails or screws.
