4
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
- Save these instructions.
IMPORTANT
- Observe all governing codes
and ordinances.
Note to Installer
- Be sure to leave these instructions
with the Consumer.
Note to Consumer
- Keep these instructions for
future reference.
Skill level
- Installation of this appliance requires
basic mechanical skills.
Completion time
- Approximately 1 hour.
We recommend that two people install this product.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Warranty.
You MUST use all supplied parts and use proper
installation procedures as described in these
instructions when installing this air conditioner.
INSTALLATION INSTRUCTIONS
NOTE:
These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or
installation in a metal CASEMENT window. Modification may be necessary when installing in windows made differently
than those shown in these instructions.
INSTALLATION TIPS:
For wood-frame casement windows:
It may be necessary to construct a frame,
using at least 1-inch thick wood, with a 15½
inch wide opening.
FOR BRICK OR CEMENT BUILDING CONSTRUCTION:
It may be necessary to put a wood stool strip
under the unit for mounting purposes.
STEP 1:
MAKE SURE YOU HAVE ALL THE
NECESSARY PARTS
Installation kit contents:
1. Platform (1)
2. Support brace (1)
3. Adjustment bolt (1)
4. Hex flange nut-1/4” (1)
5. Track seal (1)
6. Side channel seal (1)
7. Foam seal strip/sash seal (1)
8. Safety bracket (1)
9. Screw- 2 1/2” (2) or
10. Screw- 1 3/4” (2) or
11. Screw- 1” (2)
12. Screw- 3/4” (6)
13. Screw- 3/4” self-threading (7)
14. Window locking bracket (1)
15. Plastic window panel (1)
16. Side channel (2)
17. Screw- 3/8” (6)
18. Panel frame/seal assembly (1)
You will have only
one of these sets
of screws:
#9, #10 or #11.
Tools Required (Not Included):
• Flat-head screwdriver
• Phillips-head screwdriver
• Carpenter’s level
• Tape measure
• Fine tooth saw
• Electric or hand drill
PREPARING FOR INSTALLATION
