Installation and Operation Manual for the
PERENIO IONIC
SHIELD™
Cold Plasma Emitter
© Perenio IoT spol s r.o. All rights reserved
Document version: 1.0.8
Page
27
of
35
8-c
–
Inserted capsule
8-d
–
Tightened capsule
Figure 8
–
Capsule replacement process
2.3.1 CoV Capsule of the Device
Only original capsule named CoV with ionic substance must be installed in the Device
for the intended purpose of use. The CoV capsules are produced by the manufacturer
only.
Table 3
–
CoV
Capsule
ID Code
Description
CoV
Prevention of diseases caused by known coronaviruses,
by significant reduction of the viral load in the enclosed
area of application of the Device
Ionic solution for CoV capsule consists of chlorides of Mg12, Ag47, Cl17, H1, Pt78,
Au79, K19, Zn30, namely: AuCl3, AgCl, AgNO3, PtCl4, KCl, MgCl2, ZnCl2.
Liquid acrylic polymer is part of the solution.
The ionic solution is stable, it does not enter into a chemical reaction with water or
air, it does not evaporate under natural conditions.
When filling the ionic solution to trays in order to create the stable ionic substance
suitable for low power ionization, the polymer reacts with air under temperature
above +40
°C
and forms a gel with the ionic substance which remains liquid in porous
large crystal lattice of the polymer.
Summary of Contents for IONIC SHIELD PEWOW01COV
Page 2: ......