Installation and Operation Manual for the
PERENIO IONIC
SHIELD™
Cold Plasma Emitter
© Perenio IoT spol s r.o. All rights reserved
Document version: 1.0.8
Page
23
of
35
2 Installation and Setup
ATTENTION!
Before operation, you must carefully read and understand
information in
the “
Warnings
and Restrictions”
Section of this document.
Below see possible installation areas for the Cold Plasma Emitter:
Figure 5
–
Examples of installation*
* Images are provided for informational purposes only
To achieve the envisaged results, the areas of installation of the Device shall meet
the following minimum requirements:
•
Absence combustible gas, oxygen and/or hydrogen containers in the closed
room, as well as air pressure below/above atmospheric;
•
The size of the enclosed area of application for one device shall not exceed
60m
3
;
•
There is a possibility to close doors and windows in the room, as well as shut
down the supply-and-exhaust ventilation and block the air ducts for the period
of the Device operation;
•
Ability to be at a distance of more than 25cm from the Device in operation;
Summary of Contents for IONIC SHIELD PEWOW01COV
Page 2: ......