EHD1
Rev. 01
07.03.2011
©Velleman nv
3
3.
General Guidelines
Refer to the
Velleman
®
Service and Quality Warranty
on the last pages of this manual.
•
Protect this device from shocks and abuse. Avoid brute force when operating the device.
•
Familiarise yourself with the functions of the device before actually using it.
•
All modifications of the device are forbidden for safety reasons.
•
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
•
A qualified technician should service this device.
•
Note that damage caused by user modifications to the device is not covered by the warranty.
4.
Features
•
metal housing with epoxy powder coating
•
heater selection switches with pilot lights
•
adjustable thermostat
•
automatic safety cut-off overheating protection
•
thermal fuse
5.
Assembly
Refer to the illustration on page 2 of this manual.
•
Place a foot
[1]
on either side of the bottom of the heater and fix using the included screws.
6.
Use
Refer to the illustration on page 2 of this manual.
•
Choose a suitable location taking into account the safety instructions above.
•
Turn the thermostat
[3]
fully counter clockwise and insert the plug
[2]
into a suitable, grounded mains
socket.
•
Turn on the heater elements by means of the rocker switches
[4]
as desired. Turn the thermostat
[3]
clockwise. When the desired room temperature has been reached, the pilot lights
[5]
on the switches
[4]
will go out. The heater will now keep the room at set temperature by switching on and off automatically.
REMARK:
There may be a particular smell when the heater is turned on after a long period of time. This is
perfectly normal.
7.
Cleaning and Storage
•
Unplug the heater and let it cool down before cleaning.
•
Clean the housing with a slightly damp cloth. Wipe off with a soft cloth.
•
Do not use detergents or abrasive cleaning products.
•
Protect the heater from dust and store in a clean and dry place.
8.
Technical Specifications
power supply
230VAC~50Hz
heating settings
1000W/2000W
power cord length
1.5m
dimensions
600 x 350 x 100mm
weight 2.8kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this user manual, please visit
our website
www.Perel.eu
.
The information in this manual is subject to change without prior notice.
©
COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv.
All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced
to any electronic medium or otherwise without the prior written consent of the copyright holder.
