background image

 

EEM100 

V. 01 

 07/05/2015 

©Velleman nv 

3.

 

Replace the battery with a new 9 V battery. 

4.

 

Close the battery compartment. 

 

 

Warning:

 Do not puncture batteries or throw them in fire as they 

may explode. Do not attempt to recharge non-rechargeable 
batteries (alkaline). Dispose of batteries in accordance with local 
regulations. Keep batteries away from children. 

7.

 

Operation 

1.

 

Aim the IR sensor 

[B]

 at the target and press the measurement 

trigger 

[D]

 

to display the target’s surface temperature. A red laser 

spot appears on the target during measurement. 

2.

 

The distance-to-target ratio is 12:1. This means that, for example, at 
12 cm, the target must be larger than 1 cm to get a proper 
measurement. Make sure the target area is within this field of view. 

3.

 

The device can measure temperatures in °C or °F. Press the mode 
key 

[F]

 while the device is on to switch between measurement units. 

The corresponding symbol (°C or °F) appears on the display. 

4.

 

When you release the measurement trigger 

[D]

, the hold mode is 

automatically activated: the last measurement value remains on the 
display until you press the measurement key again, or until the device 
shuts off automatically (after approx. 7 seconds). 

5.

 

Note that the display is always on, while the laser is only on during 
measurement. 

 

 

Remarks:

 The temperature 

·

 

of a shiny or polished metal surface 

·

 

through a transparent surface such as glass 

·

 

of an object covered with frost, grime, oil 

cannot be measured. 

8.

 

Cleaning and Maintenance 

·

 

The IR sensor 

[B]

 is the most delicate part of the device and it shall be 

kept clean at all times. To do this, only use a soft cloth or cotton bud 
with a little water or medical alcohol. 

·

 

Allow the lens to fully dry before using the device. 

·

 

Wipe the other parts of the device regularly with a moist, lint-free cloth. 
Do not use alcohol or solvents. 

·

 

Do not submerge the device in water or any other liquid. 

·

 

There are no user-serviceable parts. Contact your dealer for spare parts 
if necessary. 

·

 

The device shall be stored between 

20° C and +65° C (

4° F to 

+149° F). 

Reviews: