BB653/BB654
V. 01 – 16/04/2018
4
©Velleman nv
When using the chimney:
Wear appropriate clothing and avoid loose sleeves.
Wear fire-resistant gloves when adding charcoal or firewood.
Wear firm, enclosed shoes as sandals do not provide any protection form hot embers.
Never leave an open fire or embers unattended.
Do not use this chimney for grilling food.
Do not use this chimney until it is completely assembled and all pars are securely fastened and
tightened.
3.
General Guidelines
Refer to the Velleman
®
Service and Quality Warranty on the last pages of this manual.
All modifications of the device are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void
the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or problems.
Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary,
incidental or indirect) – of any nature (financial, physical…) arising from the possession, use or
failure of this product.
Keep this manual for future reference.
4.
Use
1.
Install this chimney on a flat, heat-resistant and non-flammable surface. This chimney is
heavy and it is therefore recommended not to move it frequently once installed.
2.
Cover the base of the chimney with a layer of 5 cm of dry sand and gravel. This will help to
protect the chimney from excessive heat and cracking.
3.
Set up the base of your fire with a layer of newspaper, dry twigs and other tinder, leaving
gaps for air to pass through.
4.
Light to start the fire and stack one or two small logs on top. Use appropriate tools. Use
only a couple of small logs at the time and do not overload as a too intense fire may
damage the chimney due to overheating. With use, the interior of the chimney will be
covered with a layer of soot, which will cover the pores and produce a more intense fire.
5.
Let the fuel burn out completely after use.
5.
Extinguishing
Do not use water to extinguish this chimney as it could cause damage or cracks. Just stop
adding fuel and allow the fire to die naturally or douse with sand.
