PERCo Turnichetul TB 1, Assembly & Operation Manual

Page: 23 / 37

Assembly and Operation Manual
22
10.3. Turnstile operating modes in pulse control mode
See Table 3 for the operating modes set from the RC panel and for the corresponding
indication. Please note the following:
-
Setting the operating modes for each direction is independent, i.e. setting
the operating mode for one direction does not change the operating mode
set earlier for the opposite one;
-
The “Single passage in the set direction” mode can be changed to the “Al-
ways free” mode for the same direction, or to the “Always locked” mode;
-
The “Free passage in the set direction” mode can be changed to the “Always
locked” mode only.
At the turnstile power supply switching-on the reset sate of the turnstile is “Always
locked” (the mechanical release lock (7) is locked at that).
In the “Single passage in the set direction” mode the turnstile will lock automatically af-
ter a person’s passage in the set direction. The turnstile will also lock automatically, if
the passage is not made within 5 sec. In the “Bi-directional single passage” mode af-
ter the passage in one direction the countdown of the passage waiting time (5 sec.)
for the opposite direction is resumed.
Note: Pressing the button on the RC panel corresponds to the low-level signal supply
to the contacts (“Unlock A”, “Unlock B” и “Stop”) of the “XT1.L” connector block rela-
tively to the contact “GND”.
T
ABLE
3
Pulse control mode
№
THE TURNSTILE
OPERATING
MODES
ACTIONS
TO DO
INDICATION
ON THE RC
PANEL
LED
INDICATION
ON THE
TURNSTILE
HOUSING
TURNSTILE
RESPONSE AFTER
BARRIER ARMS
TURN
1
Always locked
(Locked for entry
and exit)
Press
the STOP button on
the RC panel
The red indicator
above the STOP
button is on
The red
indicator
STOP is on
2
Single passage
in the set direction
(open
for passage
of one person
in the chosen
direction)
Press the button on
the RC panel
corresponding
to the chosen
passage direction
The green
indicator
above
the button
of the chosen
passage
direction is on
The
“Green arrow”,
showing
the passage
direction is on
The turnstile
locks
3
Bi-directional single
passage (open
for one passage in
each direction)
Press both
the left and right
buttons
on the RC panel
simultaneously
The two green
indicators
(left and right)
are on
The two
“Green arrows”
(left and right)
are on
The turnstile
locks
in the direction
of completed
passage