T
В
-01 Electromechanical box tripod turnstile with two built-in readers
Figure 6 – Installation recommendations
9.2. Installation tools
– hammer drill 1,2
1,5 kW;
– hard-alloyed drill bit
16 mm for anchor bolt sleeves;
– floor chaser for cable raceways;
– flat slot screwdriver
№
2;
– flat slot screwdriver
№
5 (length 150 mm);
– cross-head screwdriver
№
2;
– horn-type and socket wrenches: S17, S13, S10, S8, S7;
– level;
– measuring tape 2 m;
– slide caliper.
Note: It is allowed to use other testing equipment and measuring tools providedthe
equipment in use ensures the required parameters and measurement accuracy.
9.3. Cable length
The maximum allowed length of the remote control panel / wireless remote control
cable is 30m.
The maximum allowed length of the turnstile power cable depends on the cable
cross-section and should not exceed:
for cable with 0.75mm2 cross – section (AWG 18) .......................... 10 m;
for cable with 1.5mm2 cross – section (AWG 16) ........................... 30 m.
9.4. Installation procedure
Note! The manufacturer shall not be liable for any damage caused as the result of
improper installation and declines any claims arising thereof in case if the installation
is done not in compliance with the instructions provided in this Manual.
9.4.1 Unpack the T
В
-01 turnstile and check the completeness as per Section 3
of the product certificate.
9.4.2 Make holes for anchor bolt sleeves for the turnstile housing installation
(Fig. 7).
Prepare a cable raceway for cables when cables are laid concealed under floor. Install
and fix the turnstile housing only after all cables inside the turnstile housing and in
17
Summary of Contents for Turnichetul TB 1
Page 37: ...www percoweb com...
