PERCo RTC-15, Assembly And Operation Manual Warranty Card

Page: 16 / 22

Protective Canopy RTC-15
10 WARRANTY PERCo
PERCo (the Manufacturer) warrants that the
RTC-15 Protective Canopy for RTD-15 Full
Height Rotor Turnstile
(the Product) complies with applicable statutory safety
requirements, electromagnetic compatibility provided that the instructions on storage,
installation and operation, given in the Assembly & Operation Manual, are observed.
The warranty period is
5 (five) years
commencing from the date of sale.
Should there be no date of sale on the warranty card, the warranty period shall commence
from the date of manufacture specified in the Certificate and on the Product label.
In the post-warranty period the replacement parts/components are warranted to be free
from defects in material or workmanship for a period of 3 (three) months from the date of
shipment of the repaired/replaced Product to the Customer.
All claims with regard to quantity, completeness and defects to appearance of the Product
delivered are accepted by the Manufacturer in writing within no more than 5 (five) working
days after the products are received by the Customer. In case of failure to meet the
abovementioned deadline no claims are accepted.
The Warranty does not cover:

products, parts and components with:
- external mechanical damages resulting in the Product’s fault;
- defects resulting from Customer's improper testing, operation, installation,
maintenance, modification, alteration, or adjustment;
- damages due to force majeure circumstances (natural disasters, vandalism etc.)
or defects as a result of external circumstances (power surges, electric discharge,
etc);

fuses, accumulators, galvanic elements and other components, replacement of which
is performed by the Customer in accordance with the Product’s in-line
documentation.
To the maximum extent permitted by the acting law, the Manufacturer does not incur a
liability for any direct or indirect losses of the Customer, including but not limited to loss of
profit or data, losses caused by idle period, missed profit, and etc related to use or
impossibility to use products and software, including possible software errors and failures.
Within the warranty period the products are repaired free of charge at the Manufacturer’s
site. The Manufacturer reserves the right to repair failed product or replace it with an
operational one. Time of repair is specified at the moment the Product is accepted for
repair. Transportation cost to and back from the place of repair shall be borne by the
Customer.
In order to shorten the repair time the Customer must inform the Manufacturer’s Technical
Support Department (the TSD) of the problem with the Product’s operation and/or about
the origin of the fault by submitting a filled-in Technical Support Form by e-mail, fax or via
the Manufacturer’s website or communicate directly a specialist of the TSD.
The Manufacturer reserves the right not to accept the Product for repair from the Customer
who failed to submit the Technical Support Form.
The Manufacturer’s warranty obligations don’t cover attendance by the experts
of a Customer and maintenance of any Product on site
If in the course of the examination taken by the Manufacturer of the Product or its
parts/components believed to be faulty, no faults have been detected, the Customer is
responsible for compensation of the Manufacturer’s expenses related to the examination.
15