Certificate & Operation Manual
Figure 3. Reader installation behind the metal surface
7.2. Tools and equipment required for installation
1.2÷1.5kW
hammer
drill;
Ø16 mm hard-alloy drill bits;
Ø 5 mm hard-alloy drill bits;
Phillips head screwdriver
№
2;
Knife
assembly;
Plumb-line and level;
Measuring tape 2m
7.3. The cables used
Recommended cable type for connection reader to external controller –
RAMCRO SA82BI-T, CABS8/EC, 8C.SEC-SC, W8ekw, cross-section 24AWG – 18AWG
(
it is prohibited to use twisted pair cables
).
Note:
For extension cables with cross-section 24AWG – 20AWG reader performance after
150 m is not guaranteed. Maximum distance between the reader and external
controller is obtained by meeting above listed requirements for product installation.
10
