Assembly and Operation Manual
2.2. Set the
Waiting period for verification confirmation.
Within that time the
controller will wait for the
“Card captured”
signal.
2.3. For parameter
Auxiliary outputs activated on VISITORS valid identifiers
presentation
set the
Activation criterion
as
For the operation time
. After that
mark by flag
Auxiliary output
№
3.
Activation of this output will be a signal for
“Card capture”
to the card capture reader:
3. The card capture reader generates the
“Fault”
signal to the auxiliary input
№
1 and
“Activation of auxiliary input”
is registered at that. The system response can be
configured. For controller
Auxiliary input
№
1,
parameter
Type
set as
Standard.
Parameter
Normal condition of the contact
set as
Disconnected.
Using the other
parameters configure the system response:
16
