User Manual
http://www.pepwave.com
67
Copyright ©
2014
Pepwave
9.2 Firmware
Click
Firmware
, located under
Commands
on the left, to check firmware versions, select a boot
ROM, and update your
Pepwave access point’s firmware.
Commands – Upgrade Firmware
Firmware Version
The firmware version loaded into the flash partitions.
Flash Status
The firmware status on the flash partitions.
Boot from
Indicates which flash partition boots up the system.
Firmware Upgrade
Target
Indicates which flash partition will be upgraded with the next firmware
upgrade.
Firmware Upgrade
Select
Online
, then click
Check
to look for firmware upgrade files online.
Select
Manual
to choose a downloaded firmware update. In either case, a
reboot is required after upgrading the firmware.