User Manual
http://www.pepwave.com
29
Copyright ©
2014
Pepwave
7.1.2 Advanced
System Settings - Advanced
Management VLAN
ID
VLAN ID from which management sessions are allowed. Establishment of
management sessions is restricted to the specified VLAN ID. If
Management VLAN ID
is set to
0
, management sessions can be
established without VLAN ID restrictions. Default value is
0
,
which means
that
tagging is disabled
, not that management sessions will be tagged
with
0
.
NTP Server
Network Time Protocol (NTP) Server hostname used when synchronizing
your
access point’s system clock. Default value is
pool.ntp.org
.
Scheduled Reboot
Automatic reboot schedule. Check
Enable
, then set the reboot schedule
using the
Schedule
,
Day
, and
Time
drop-down menus.
Ethernet
Speed/Duplex
Ethernet send and receive speed.
Controller IP
Address / Domain
Name
IP address or domain name of an optional Peplink Balance AP Controller.
Leave this field blank if not using a Balance AP Controller.
AP Mode
Access point operation mode. Choose
Bridge
or
Router
. When
Router
is
selected, the following
Manual Router Settings
will be available: