Pepwave AP One User Manual Download Page 51

Page: 51 / 76

User Manual

http://www.pepwave.com

2014

Pepwave

7.4.1 Radio Settings

Advanced Wireless Settings - Radio Settings

Protocol

802.11bgn

: Pepwave access point accepts 802.11b, 802.11g, and 802.11n

client association requests.

802.11b/g

: Pepwave access point accepts both 802.11b and 802.11g client

association requests.

802.11b Only

: Pepwave access point accepts only 802.11b client

association requests.

802.11g Only

: Pepwave access point accepts only 802.11g client

association requests.

802.11n Only

: Pepwave access point accepts only 802.11n client

association requests.

Operating

Country

Note:

The country code selection is for non-US model only and is not available

to all US model. Per FCC regulation, all WiFi product marketed in US must
fixed to US operation channels only.

Channel

Bonding

Only available when

Protocol

is set to

802.11bgn

802.11n Only

. Choose

20MHz

20/40MHz

, or

40MHz

Channel

802.11 channel. Choose from

. In North America and Europe, choose

from

. (Channel

is only available in Japan when using the 802.11b

protocol.) If

Auto

is set, the system scans channels based on the scheduled

time and automatically chooses the most suitable channel.

Power Boost

Enables the power boost feature, which maximizes your acce

ss point’s Wi-Fi

capacity. Please enable only if local regulations permit.

Tx Output

Power

Choose

Max

High

Medium

, or

transmission output power.

Summary of Contents for AP One






































































Search results

Summary of Contents for AP One

Reviews:

Pepwave AP One, User Manual, Page: 51 / 76

Search results

Summary of Contents for AP One

Reviews: