Commissioning
2
0
2
0
-0
3
21
4.5
Network Settings
The interface modul uses implicit messaging. Therefore, any position and speed data is
mapped directly in the controller. The following figure shows the correct setting for integrating
the interface module into the network.
Figure 4.2
Network settings
You can enter all values with the exception of the values for "Input Size" and "Output Size" on
the input screen of your project planning tool. The values for "Input Size" and "Output Size"
depend on the number of readers and the desired data output. You have to adjust these
according to your hardware configuration.
Parameters
Value
Input assembly
101
Output assembly
100
Configuration assembly
4
Minimum RPI
20 ms
