background image

One Company, Two Divisions.

Process Automation
Division

Factory Automation 
Division

Product Range

Signal conditioners
Intrinsically safe interface modules
Remote Process Interface (RPI)
Intrinsically safe field bus solutions
Level control sensors
Process measuring and control systems    
engineering at the interface level
Intrinsic safety training

Areas of Application

Chemical industry
Industrial and community sewage
Oil, gas and petrochemical industry
PLC and process control systems
Engineering companies for process systems

Product Range

Digital and analogue sensors 
in different technologies

Inductive and capacitive sensors
Magnetic sensors
Ultrasonic sensors
Photoelectric sensors

Incremental and absolute rotary encoders
Counters and control equipment
Identification Systems
AS-Interface

Areas of Application

Machine engineering
Conveyor or transport
Packaging and bottling
Automotive industry

Subject to reasonable modifications due to technical advances     Copyright FUCHS     Printed in Germany     Part. No.

Worldwide Headquarters 

Fuchs GmbH   K nigsberger Allee 87 
68307 Mannheim   Germany 
Tel. +49 621 7 76-0   Fax +49 621 7 76-10 00

e-mail: [email protected] 

http://www.pepperl-fuchs.com

USA Headquarters  

Fuchs Inc.   1600 Enterprise Parkway
Twinsburg, Ohio 44087   Cleveland-USA 
Tel. (330) 4 25 35 55   Fax (330) 4 25 46 07

e-mail: [email protected]

Asia Pacific Headquarters

Fuchs Pte Ltd.   P+F Building
18 Ayer Rajah Crescent   Singapore 139942
Tel. 67 79 90 91   Fax 68 73 16 37

e-mail: [email protected]

Service Area

Worldwide sales, customer service and consultation via competent and reliable Fuchs 
associates ensure that you can contact us wherever or whenever you need us. We have 
subsidiaries worldwide for your convenience.

 

120 487 HE 07/02 

Summary of Contents for VISIOLUX VB14 Series







































Reviews: