Power Supply PS1000-A6-24.10
Accessories
20
21
-1
1
35
25
Accessories
PS1000-D2-24.20.RM – Redundancy Module with
Automated Load Sharing
The redundancy module is equipped with two input
channels, which are individually decoupled by utilizing
MOSFET technology. Using MOSFETs instead of diodes
reduces the heat generation and the voltage drop between
input and output.
The device does not require an additional auxiliary voltage
and is self-powered even in case of a short circuit across
the output.
Due to the low power losses, the unit is very slender
and only requires 32mm width on the DIN mounting rail.
The device is featured with an automated load sharing
between the connected power supplies. The device
monitors the function of the redundancy circuitry
and provides a signal in case of too high of output current,
which could prevent redundancy, if one power supply fails.
Further information and wiring configurations can be found
in chapter 26.7.
